|
|
|
Heating System Efficiency |
|
|
|
|
Written by Admin
|
|
Thursday, 10 June 2010 |
|
When a heating system is installed, it should be running at peak efficiency (if it isn't call us now!). However, after a few years, it may need to be checked to keep that level of economic operation. While there are many people who can check that the system is functional at a basic level, getting the system to work at peak requires a thorough knowledge of how the modern boiler and thermal store systems work together, and possibly how solar heating and pumps operate.
If it's been some time since your heating system was checked, call us for a detailed inspection and report. We will work to get the maximum efficiency that your heating system is capable of delivering, and that will save you money. |
|
|
Written by Admin
|
|
Thursday, 26 March 2009 |
|
Radiator Isolator valve
The purpose of this valve is to enable one to have heated radiators in the
bathroom in warm weather when the rest of the house radiators will normally be
off.

The valve is close to the floor near the wall at the front of the cylinder.

The valve is motorised and has been set so that when it is ‘off’ ie not powered,
it restricts the hot water so that it only goes to the bathroom radiators.

When it is ‘on’ ie powered, it allows hot water to flow to the room radiators.
If the valve goes wrong, it will probably jam closed which means that only the
bathroom radiators will be on.

The valve has a manual override so that when off, it can be ‘locked’ open
manually. To use this ‘lock’ the valve has to be off. There is a lever and this
has to be moved slowly, against the gear, and locked into the hook or ratchet.
It will then be held open.
|
|
Last Updated ( Thursday, 26 March 2009 )
|
|
|
Written by Admin
|
|
Monday, 16 April 2007 |
|
A condensing boiler is a high efficiency modern boiler that incorporates an extra heat exchanger so that the hot exhaust gases lose much of their energy to pre-heat the water in the boiler system. When working at peak efficiency, the water vapour produced in the combustion process condenses back into liquid form releasing the latent heat of vaporisation. A side effect is that this water, known as condensate, which is usually acidic, has to be piped away to a drain or soakaway. To learn more about how a condensing boiler can lower your heating costs, contact us today! |
|
|
Written by Admin
|
|
Monday, 16 April 2007 |
|
There are three main types of heating system: conventional, combi and thermal store. The combi boiler has been a common choice in recent years, but it does have some drawbacks. The thermal store and boiler combination produces the highest efficiency - and that means the lowest bills for you. It costs more to install, but then it saves on your gas bill month after month. So, to decide which one is right for you, just contact us and we'll go through the options with you. |
|
Last Updated ( Monday, 16 April 2007 )
|
|
|
Plumbing2k - Call 07956 581 753 |
|
|
|
|
Written by Web Master
|
|
Saturday, 12 June 2004 |
|
Plumbing Services for South London Call 07956 581 753 for more information or to request an estimate.
Whatever your heating or plumbing needs in the South London Area, we are here to help you with a fast, efficient, courteous and fairly-priced, comprehensive service. We serve homeowners and small businesses in the following areas of South London: Norwood, Streatham, Tooting, Croydon, Dulwich, Tulse Hill, Crystal Palace, Sydenham, Brixton, Clapham, Balham, Wandsworth, Herne Hill and the surrounding areas. FREE ESTIMATES. We are happy to provide FREE estimates for new installations or replacement of central heating or solar heating systems. DESIGN SERVICE. We can also design a solar heating system which can be installed by local contractors in other parts of the country.
Services Review -
Specialists in the installation of solar energy panels for water heating. -
We offer several high efficiency boiler installations - that can save you significant money on your heating bills! -
Full central heating system installation and servicing - we take care of the whole project for you. -
New boilers - we can replace your existing boiler with a new model that runs at higher efficiency (without changing any other parts of your system - this can be very cost effective). -
Radiators and controls - we can upgrade any radiators that are not working well, and install money saving thermostatic valves onto them. -
New bathrooms - we can install complete new bathrooms, including tiling, bathroom suite, and all the plumbing needed. The difference this makes to the value of your home can be VERY significant! -
Building work including foundation repairs, for example where timbers have been affected by dry or wet rot, or where there are cracks on the structural walls of your home. - System Design - we specialise in carefully designed modern heating systems including solar options and thermal stores.
Call 0208 766 6644 for a fast estimate and friendly, professional response. Why should you use the Plumbing2k for your Plumbing needs? -
Our prices are competitive and allow us to do your job right. -
We never cut corners. -
Our staff are skilled in solar heating design and installations. -
You'll receive a hassle-free service. -
We specialise in advanced central heating systems including Thermal Stores. -
Our quality and customer first approach means you get a great deal. -
We are GAS SAFE REGISTERED and we are CORGI members with over 25 year's experience in plumbing, heating and building work.  | Thermal Store Installation Our customers need to get value for money on their heating bills. Older boilers waste a great deal of energy- and that costs a lot of money! The answer is a modern Thermal Store - because it's very efficient and can reduce your heating bills. Every month it saves you more, and more... |
PLUMBING 2k - your South London Plumbing and Central Heating Service.  |
|
Last Updated ( Thursday, 10 June 2010 )
|
|
|
|